Site Preparation Jacksonville, FL Build-Ready Ground. Every Single Time.
Your foundation crew cannot start on ground that is not graded correctly. Your builder cannot schedule trades on a lot that is not build-ready. We handle clearing, grading, lime rock, erosion control, and finish grade across all of Duval County using CAT D6N dozers with Trimble GPS grade control. That is site preparation in Jacksonville FL done right.
100+ ReviewS
Licensed & Certified
15+ Years in Duval County
The Grade Was Off by 8 Inches. His Foundation Crew Could Not Start.
A general contractor in Ponte Vedra called
us last fall. His previous site prep crew
had finished rough grading and left. The
grade was off by more than 8 inches across
the build pad. His foundation crew was
scheduled for the next morning. His fine
grading contractor quoted $8,000 to fix it.
We walked the site. We confirmed the problem
in 20 minutes. We brought in our CAT D6N
with Trimble GPS grade control and hit his
engineer’s finish grade within 0.1 feet
across the entire pad.
His foundation crew started the next morning.
He saved $8,000 in change orders. He has
used us on every project since.
Here is what most Jacksonville site prep
crews will not tell you. Grade accuracy
directly determines what every trade that
follows pays. A rough grade that is 6 inches
off costs your foundation crew a day.
A grade that is 12 inches off costs you a
change order. Trimble GPS grade control is
not a luxury on a build site. It is how you
protect your construction budget.
That is site preparation in Jacksonville FL
done right — graded to spec, lime rock set,
and build-ready before your foundation crew
arrives.
Why Jacksonville Builders and Homeowners
Trust Our Site Prep Crews
Trimble GPS Grade Control — Every Job
Every CAT D6N dozer in our fleet runs
Trimble GPS grade control. We hit
engineer-specified finish grades within
0.1 feet on every residential and
commercial site prep job in Jacksonville.
That accuracy is what keeps our GC clients
coming back — and what saves them money
on the trades that follow.
Lime Rock Base — Installed Right
A properly installed lime rock base is
what keeps Florida’s sandy and clay soils
from shifting under construction traffic.
Per Shaw’s Land Clearing Northeast Florida
data, lime rock placement and compaction
in key areas — house pads, driveways,
access roads, equipment paths — is a
critical step most homeowners never hear
about until their pad fails after framing.
We install it on every applicable job.
Florida Soil Types — We Know the Difference
Jacksonville’s Eastside and Beaches area sits on sandy soil — fast to grade, lowest cost. The Westside and Northside have heavy clay pockets that shift under load. Per South Florida Site Work 2025 pricing data, sandy soils cost $1,500 to $3,000 per acre to grade while clay soils run $2,000 to $4,000 per acre. We assess your specific soil conditions on the site walk and quote accordingly — not from a national average.
Erosion Control and Silt Fence
Florida’s heavy summer rainy season turns
an unprotected graded site into an erosion
problem in one afternoon. We install silt
fence, turbidity barriers near water, and
seeding where required by SJRWMD or City
of Jacksonville stormwater standards. Proper
erosion control is part of every site prep
scope — not an add-on after the inspector
flags your site.
Complete Site Prep Package
Need clearing, grading, lime rock, and erosion control in one mobilization? We handle the complete scope with one crew, one schedule, and one invoice. No gap between your clearing contractor and your grading contractor that delays your GC’s build schedule. Most residential site prep packages in Jacksonville complete in 3 to 7 days depending on lot size and scope.
Drainage Grading for Flood Zone Lots
Many Jacksonville lots — especially in
Mandarin, Orange Park, and Baymeadows —
sit in or near FEMA flood zones. Proper
finish grading that directs stormwater
away from the foundation is not optional
on these lots. It is what prevents the
$15,000 to $40,000 drainage remediation
cost we see on improperly graded lots
three to five years after construction.
Site Preparation and Grading Services
Jacksonville FL
Residential Site Preparation Jacksonville FL
Complete build pad preparation for new home
construction — clearing, rough grade, finish
grade, lime rock base, and erosion control.
We work directly with your GC and engineer
from site walk through final grade sign-off.
Most residential site prep jobs in Mandarin,
Orange Park, Fleming Island, and Ponte Vedra
complete in 3 to 5 days.
Commercial Site Preparation Jacksonville FL
Large-scale site prep for commercial
developments, industrial sites, and
subdivisions across Jacksonville’s Northside,
Southside, and Baymeadows corridors. Komatsu
PC360LC-11 excavators and CAT D6N dozers
with Trimble GPS handle commercial-scale
earthwork that smaller machines cannot
deliver at build-ready accuracy.
Grading and Regrading Services
Finish grading, rough grading, and regrading
for drainage correction, flood zone compliance,
and build pad restoration. Per HomeAdvisor
2025 data, land grading in Jacksonville
typically costs $770 to $3,000 for 1,000 to
2,000 square foot lots. Larger acreage runs
$1,500 to $5,000 per acre for basic rough
grading according to South Florida Site Work
2025 Florida-specific pricing data.
Lime Rock Base Installation
Lime rock base for house pads, driveways,
access roads, and equipment paths. Proper
lime rock placement and compaction protects
Florida’s sandy and clay soils from shifting
under construction and long-term traffic
load. Compaction documentation provided
for engineer certification where required
by City of Jacksonville building permits.
Erosion Control and Silt Fence
Silt fence, turbidity barriers, and
stabilization seeding installed per SJRWMD
and City of Jacksonville stormwater
requirements. We handle all erosion control
as part of every site prep scope — not as
a separate mobilization. Proper installation
on the first visit prevents inspector flags
that delay your build permit sign-off.
Driveway and Access Road Preparation
Driveway sub-grade preparation, lime rock
base, and finish grading for residential
driveways and commercial access roads.
Ponte Vedra and Fleming Island properties
with large lots often need access road
preparation before heavy construction
equipment can reach the build site without
damaging existing landscaping or turf.
Recent Site Preparation Projects Across Jacksonville FL
PROJECT 1:
Location: Ponte Vedra, FL
Job: Residential build pad grading correction
Problem: Previous grade off by 8+ inches
Equipment: CAT D6N + Trimble GPS
GC savings: $8,000 in fine grading costs
Accuracy: Within 0.1 feet of engineer spec
PROJECT 2:
Location: Southside Jacksonville — Baymeadows
Job: 3.2-acre commercial site prep
Scope: Clearing + rough grade + lime rock base
Equipment: CAT D6N + Komatsu PC360LC-11
Timeline: 4 days
Result: Foundation crew on-site day 5
PROJECT 3:
Location: Mandarin, Jacksonville FL
Job: Residential lot — full site prep package
Scope: Clearing + grading + lime rock + silt fence
Lot size: 0.6 acres
Timeline: 3 days
Soil type: Clay — $2,000-$4,000/ac range applied
PROJECT 4:
Location: Orange Park, Clay County FL
Job: Flood zone lot — drainage grading + fill
Challenge: FEMA flood zone — finish grade critical
Equipment: CAT D6N Trimble GPS + Kenworth fill
Erosion control: Silt fence + seeding installed
Result: Grade directs stormwater away from pad
PROJECT 5:
Location: Fleming Island, Clay County FL
Job: Acreage site prep + access road
Scope: 1.8 acres — clearing, grading, lime rock
Access road: 180 linear feet lime rock base
Timeline: 5 days
Result: Heavy equipment access to back of lot
FAQS
Need a Build-Ready Lot? Let’s Get Your Grade Right the First Time.
That Ponte Vedra GC saved $8,000 because our Trimble GPS hit his engineer’s spec within 0.1 feet. His foundation crew started the next morning. Zero change orders. Zero delays.
That is our standard on every site
preparation job in Jacksonville FL.
Marcus reviews every inquiry personally
within 4 hours. Free site assessment
scheduled within 48 hours. Written scope
and quote before any machine arrives.
Tell us your lot size, soil type if known, what you plan to build, and your engineer’s grade spec if available. We assess permit requirements and soil conditions on your first site walk at no charge.